BlogCosts

House construction cost per sq ft: what the rate includes, and what it does not

NextAwas engineering teamUpdated November 16, 20262 min read

The first question every family asks is what a home costs per sq ft. The honest answer has two parts: the rate, and what that rate covers. This guide uses the NextAwas package rates as they stand on the day it was published.

The four rates

Package Rate per sq ft What it is
Civil Structure ₹1,199 Structure only, ready for your own finishing.
Essential ₹1,699 A finished home with standard fittings.
Premium ₹1,999 Better fittings, more ceilings and glass railing.
Luxury ₹2,599 Wall-hung fittings, frameless glass and extras on every floor. Minimum built-up area 4,000 sq ft.

All rates are per sq ft of built-up area. GST is extra and is charged on the total billing.

What that means for a whole home

Built-up area Civil Structure Essential Premium
1,000 sq ft ₹12.0 lakh ₹17.0 lakh ₹20.0 lakh
1,500 sq ft ₹18.0 lakh ₹25.5 lakh ₹30.0 lakh
2,000 sq ft ₹24.0 lakh ₹34.0 lakh ₹40.0 lakh

Luxury starts at 4,000 sq ft, which comes to ₹104.0 lakh before GST. These are rate multiplied by area; your own figure depends on your plot and plan.

What the rate covers

The rate covers material, conveyance, loading and unloading at site, labour and work supervision, for the work shown in the drawing and listed in your package.

What is charged extra

  • Work beyond what the drawing shows.
  • Extra elevation work and roof waterproofing.
  • Septic tank and soak pit, if required.
  • Boring, if needed.
  • Plinth level above 2 ft, and floor height above 10 ft.
  • Anti-termite treatment.
  • Government and development authority charges.

How the area is measured

The complete slab, including any open-to-sky cut-out, is counted for billing, and the staircase is measured twice. Ask for this to be written in your agreement, with any builder, so the area on the bill is never a surprise.

How to compare two quotations

  1. Check that both are for the same built-up area, measured the same way.
  2. Ask what is included and what is extra, in writing.
  3. Ask whether GST is inside the rate or on top of it.
  4. Ask which brands and grades of cement, steel and fittings the rate assumes.
  5. Ask who checks the work at each stage, and whether those checks are recorded.

See what each package includes, or ask for an estimate for your plot.

Share this articleWhatsApp
See your home before you build itPlan my home →
WhatsApp